自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

Analysis of a magnetic field and Hall effects in nanoliquid flow under insertion of dust particles

In this study, the two‐phase hydromagnetic flow of a viscous liquid through a suspension of dust and nanoparticles is considered. The influence of the Hall current is also taken into account. The similarity variables are utilized to transform the problem into one independent variable. The obtained expressions in one independent variable are solved through the Runge–Kutta–Fehlberg scheme connected with the shooting procedure. The computed results are sketched for employing multiple values of physical constraints on the temperature and velocity of the nanofluid and dust phase. The characterization of various nanoparticles like Cu, Al₂O₃, TiO_2, and Ag on velocities and temperatures of both phases is made through plots. A comparative analysis in the limiting approach is presented to justify the present solution methodology. The range of emerging parameters is taken as 0 ≤ l ≤ 3, 0.1 ≤ β_t ≤ 3, 0 ≤ m ≤ 2.5, 0 ≤ M² ≤ 2, 0.1 ≤ β_v ≤ 3, 0 ≤ ? ≤ 0.4, and ?0.8 ≤ λ ≤ 0.8. From the study, it is revealed that β_t has the opposite effect on the temperature of dust and nanofluid phases. The Hall parameter m raises the profiles of velocities in the nanoliquid and dust phases. Also, it is found that the transverse velocities h(η) and H((η) and temperatures θ(η) and θ_p(η) rise for larger ?.     

Steady MHD Casson Ohmic heating and viscous dissipative fluid flow past an infinite vertical porous plate in the presence of Soret,Hall, and ion‐slip current

In the present study, the influence of Hall and ion‐slip current on steady magnetohydrodynamics mixed convective, Ohmic heating, and viscous dissipative Casson fluid flow over an infinite vertical porous plate in the presence of Soret effect and chemical reaction are investigated. The modeling equations are transformed into dimensionless equations and then solved analytically through the multiple regular perturbation law. Computations are performed graphically to analyze the behavior of fluid velocity, temperature, concentration, skin friction, Nusselt number, and Sherwood number on the vertical plate with the difference of emerging physical parameters. This study reflects that the incremental values of Casson fluid parameter and Schmidt number lead to reduction in velocity. However, fluid velocity rises due to enhancement of ion‐slip parameter but an opposite effect is observed in case of Hall parameter. In addition, the Sherwood number declines with enhancing dissimilar estimators of the chemical reaction, Schmidt number, as well as Soret number.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

光纤电流互感器自适应温度补偿系统

针对光纤光栅(FBG)电流互感器容易受到温度影响这一特性，设计了一种基于STM32单片机的光纤光栅电流互感器温度补偿系统。通过单片机实现PID自适应控制算法，锁定电流互感器输出的电压值恒定在静态工作点，从而实现电流互感器不受外界温度影响得到稳定的电流信号输出。实验结果表明，在22~39 ℃范围内，输出电压稳定度在±1%以内，解决了电流互感器受限于环境温度的问题，实现了电流与温度的同时测量。经过此方法改进后的电流互感器测量精度高、系统结构简单、成本低、可靠性高，加快了光纤光栅电流互感器的实用化进程。     

MOCVD-derived GdYBCO tapes with smooth surface and low Rs based on a new self-heating technology

The metal organic chemical vapor deposition (MOCVD) method was used to prepare GdYBCO films on LaMnO₃/ homo epitaxial-MgO/ ion-beam-assisted-deposition-MgO/ solution-deposition-planarization-Y₂O₃ buffered Hastelloy tapes. By adopting a simple self-heating technique, the substrates were heated by the joule effect after applying a heating current (I_h) through Hastelloy metal tapes. The effects of substrate temperature and (Gd, Y)/Ba ratio (r_c) in the precursor on the biaxial texture, surface morphology and superconducting performance of GdYBCO films were systematically investigated by varying the values of I_h and r_c. Needle-like outgrowths formed on the substrate surface were characterized using a scanning electron microscope, energy dispersive spectrometer and X-ray diffraction system. The results show that a high I_h or r_c leads to the formation of needle-like outgrowths. Therefore, I_h and r_c are crucial process parameters that control the growth of needle-like outgrowths on the surface of GdYBCO films. Three hundred nanometer thick GdYBCO films were prepared at different I_h and r_c by the MOCVD process. At an I_h of 27.0?A and an r_c of 0.6, the surface of the GdYBCO film was very smooth and dense, which can provide a good template for multiple depositions of GdYBCO films. The critical current density of the deposited 300?nm-thick GdYBCO film was 4.4 MA/cm² (77?K, 0?T), which is attributed to good biaxial texture and appropriate film composition. Furthermore, the microwave surface resistance (77?K, 10?GHz) of the GdYBCO film was merely 0.581?mΩ.     

Effects of chemical etching on structure and properties of Y0.5Gd0.5Ba2Cu3O7-z coated conductors

Corrosion resistance is a crucial property to achieve successful superconducting joints of Y_0.5Gd_0.5Ba₂Cu₃O_7-z (YGdBCO) coated conductors (CCs). Cu and Ag metallic layers need to be fully removed from the area of conductor to be joint to allow for a superconducting path across the joint. Therefore, when using a wet etching process to remove the metallic layers, the joint performance can be significantly influenced by the etching conditions. The effects of chemical etching with ammonia water and hydrogen peroxide mixture on crystal structure, surface microstructure and critical current (I_c) of YGdBCO CCs were systematically investigated. We found the set of etching parameters that does not affect conductor performance, leaving the I_c of the YGdBCO conductor unchanged upon etching. However, when the etching conditions are not optimal, decrease in I_c was found and the underlying reasons driving the degradation were investigated. Raman spectroscopy and XRD analysis indicated that the reduced I_c is mainly due to oxygen deficiency in the YGdBCO crystal lattice.     

基于STM32的开环霍尔电流传感器的温度补偿研究

研究了一种基于软件补偿结合恒流源补偿的改进温度补偿方法,应用单片机、恒流源、数字温度传感器、乘法器等硬件电路,对传统软件补偿进行了优化,补偿效果较传统恒流源补偿有了明显提升,“温漂”整体下降了约13.7%。在传统的温度补偿方法如热敏元件补偿、恒流源补偿、软件补偿等方式上做了补充,对于霍尔电流传感器精度的提升及实际生产需求的满足有重要意义。     

A two-dimensional air streamer discharge model based on the improved Helmholtz equation at low temperature and sub-atmospheric pressure

In this paper, an efficient boundary condition is applied to solve the photoionization rate, and a two-dimensional numerical simulation is carried out for the development and propagation of an air streamer at low temperature and sub-atmospheric pressure. The results show that the new boundary condition improves the calculation accuracy, but the influence of photoionization on the streamer discharge process is not obvious. The discharge current in the development of streamer discharge is defined, and the corresponding expression of the positive and negative streamer discharge current is given. The influence of the electric field exceeding the threshold value on the discharge process is preliminarily introduced. In the process of discharge, only the propagation velocity of the streamer is obviously higher than that of normal temperature and pressure, and the trend of the other parameters is basically the same as that described in the previous paper. The above results give us a deeper understanding of the discharge characteristics under low temperature and sub-atmospheric pressure, which has certain significance for the development of aviation and high voltage engineering.     

一种新颖的SPMSM驱动系统自适应死区补偿方法

逆变器死区效应将造成电机电流畸变,为提高表贴式永磁同步电机电流控制精度,提出一种自适应死区电压补偿策略。该方法利用参考电流建立d、q轴死区电压核函数,能够在表贴式永磁同步电机电阻、电感参数未知的情况下,对d、q轴死区电压的幅值进行辨识,将辨识的电压幅值与其核函数相乘得到所需补偿的死区电压。从而解决了输死区电压造成的相电流畸变难题。仿真结果表明,所提出的电流控制策略能够有效减少相电流谐波含量、提高电流控制精度。